Use Filters

Quick Filters

Use quick filters to enter conditions for each column and filter devices that are displayed on the device list.

  1. In the navigation tree, click [Device List], and select a category or group.

  2. Click (Filters).

  3. Enter the filter condition in the input field displayed above the column.

Depending on the column item, you can click the drop-down list and select a value as the filter condition.

  1. Click (Filters).

Only those devices that match the specified value are displayed.

Enter filter values into the other columns to further filter the devices that are displayed.

 

Using Power Filter

Use a power filter to filter all devices in the device list by specific values. Create and save a power filter to display only those devices that match a specified value in the navigation tree with one click. For example, you can display only the devices with an error as the printer status or only the devices with a counter that exceeds a specific value.

  1. In the navigation tree, click [Device List].

  2. Click (Manage Filters) at the bottom left of the navigation tree and select [Create Filter].

  3. On the Create Filter screen, click [Filter Blocks] and select the type of filter condition.

  4. Check a filter condition item from the displayed list.

To add another filter condition, repeat Steps 3 and 4.

If the standard Filter Blocks do not produce the results you want, select [Custom Criteria] from the Filter Blocks list to set your own criteria.

  1. When the specification of filter conditions is complete, enter the name of the power filter and click (Save Filter).

The device list is updated, and only those devices that match the configured power filter are displayed.

  1. To apply a power filter, select the power filter name from the drop-down list below [Device List] in the navigation tree.

 

To change the filter condition of a power filter, select the name of the power filter you want to change from the Power Filter drop-down list, click (Manage Filters), and select [Modify Filter].

You cannot share a saved power filter with another user.